Just for general information, one of our customers upgraded the firmware on his Sanyo VCC4000 this week and we established that you can only perform the firmware upgrade from an SD card (not via the network connection - which the upgrade instructions say you can do).
Firmware was upgraded to help with use of an HDMI capture card, which previously was failing to sync properly to the HDMI output from the camera (because originally it was slightly off of 50% frequency). Firmware upgrade...
Upgrading the firmware on the Sanyo VCC-HD4000P
Firmware was upgraded to help with use of an HDMI capture card, which previously was failing to sync properly to the HDMI output from the camera (because originally it was slightly off of 50% frequency). Firmware upgrade...
Upgrading the firmware on the Sanyo VCC-HD4000P