The camera is an Acusense DS-2CD2T46G1-2I and it will not power on after power was back. First time it did this, I went on location and saw that is connection with POE switch had no LED's on. So suspected that camera was dead. So, removed camera and powered it with 12v, and it was back on. Checked with another cable to see if POE is ok, so it was. Mounted it back in it's place, all was fine. Even changed it's POE port on the switch. So I left the location and then power...
Acusense camera won't power on on it's own after power outage
Acusense camera won't power on on it's own after power outage