hi Guys so I have a Wireless link from my cameras for my network, so basically when I plug the link into my laptop I can see the four cameras but when I plug the cable into my switch to join the network I loose the link completely and can’t see them any ideas
↧
Wireless links
↧
Hikvision DS7216HWI-SH DVR Boot issues
I have been trying to sort out boot issues on the above DVR, which I got hold of to try and fix. I've never had it working although it has worked well in the past.
It boots to the Hikvision "Embedded Net DVR" splash screen then the monitor states that it "cannot display this video mode". Then it seems to recycle and reboot to the splash screen.
I cannot see any video so cannot access the device config settings, although the front Tx/Rx light and my ethernet hub traffic light are flashing...
Hikvision DS7216HWI-SH DVR Boot issues
It boots to the Hikvision "Embedded Net DVR" splash screen then the monitor states that it "cannot display this video mode". Then it seems to recycle and reboot to the splash screen.
I cannot see any video so cannot access the device config settings, although the front Tx/Rx light and my ethernet hub traffic light are flashing...
Hikvision DS7216HWI-SH DVR Boot issues
↧
↧
Camera down after New Router
Hello,
I'm hoping someone can help. I had 3 Hikvision cameras and an NVR installed in October last year. Everything has been working great until we upgraded the routers yesterday to a Whole Home Mesh Wifi System yesterday. I have managed to get the NVR online and can see the 2 camera connected directly to it but not the front door camera.
The original setup was; 2 cameras front and back of house into the NVR in the loft. The NVR was then connected to a Wifi Powerline hotspot. The last...
Camera down after New Router
I'm hoping someone can help. I had 3 Hikvision cameras and an NVR installed in October last year. Everything has been working great until we upgraded the routers yesterday to a Whole Home Mesh Wifi System yesterday. I have managed to get the NVR online and can see the 2 camera connected directly to it but not the front door camera.
The original setup was; 2 cameras front and back of house into the NVR in the loft. The NVR was then connected to a Wifi Powerline hotspot. The last...
Camera down after New Router
↧
Ezviz c6t
Updated the app about a week ago, reset camera wont let me look back on recorded videos, only have live view, anyone help please.
↧
help for firmware tester dahua DH-PFM905
hello Friends i'm looking for New firmware for tester dahua DH-PFM905 now i have version 0167
i need New version.
pls help me
i need New version.
pls help me
↧
↧
Trigger alarm or email for no recording
Just to check is there any way to trigger an email or alarm when my camera is not recording in ivms. As I set all my nvr to record continuously.
I have the size of about 388 camera across 22nvr
It's hard for me to keep track of all camera
If there is a way appreciated your guy help
Thanks
I have the size of about 388 camera across 22nvr
It's hard for me to keep track of all camera
If there is a way appreciated your guy help
Thanks
↧
Help with network over powerline wifi
Hi all
I have installed 6 hikvision cameras and mounted a switch in the loft which I have run them all to. I've had to put the switch up there due to accessibility issues. I am putting the NVR in the bedroom below the loft, in a cupboard out of the way. The issue I have is that of getting an internet connection up there. I have a router in the living room and a powerline booster which feeds an adapter upstairs, booting the signal. There is a port in the adapter, but only one to...
Help with network over powerline wifi
I have installed 6 hikvision cameras and mounted a switch in the loft which I have run them all to. I've had to put the switch up there due to accessibility issues. I am putting the NVR in the bedroom below the loft, in a cupboard out of the way. The issue I have is that of getting an internet connection up there. I have a router in the living room and a powerline booster which feeds an adapter upstairs, booting the signal. There is a port in the adapter, but only one to...
Help with network over powerline wifi
↧
Camhi pro
Hi
When I'm in the camhi app my camera works fine & connection to internet is fine, however when I come out of app it seems to disconnect my camera until I go back in short of leaving the app on 24 hours a day not sure what to do?
When I'm in the camhi app my camera works fine & connection to internet is fine, however when I come out of app it seems to disconnect my camera until I go back in short of leaving the app on 24 hours a day not sure what to do?
↧
Hikvision camera down after New Router installed
Hello,
I'm hoping someone can help. I had 3 Hikvision cameras and an NVR installed in October last year. Everything has been working great until we upgraded the routers yesterday to a Whole Home Mesh Wifi System yesterday. I have managed to get the NVR online and can see the 2 camera connected directly to it but not the front door camera.
The original setup was; 2 cameras front and back of house into the NVR in the loft. The NVR was then connected to a Wifi Powerline hotspot. The last...
Hikvision camera down after New Router installed
I'm hoping someone can help. I had 3 Hikvision cameras and an NVR installed in October last year. Everything has been working great until we upgraded the routers yesterday to a Whole Home Mesh Wifi System yesterday. I have managed to get the NVR online and can see the 2 camera connected directly to it but not the front door camera.
The original setup was; 2 cameras front and back of house into the NVR in the loft. The NVR was then connected to a Wifi Powerline hotspot. The last...
Hikvision camera down after New Router installed
↧
↧
How can i connect a 2.4ghz AP to a 5.8ghz AP
I have a existing AP of 5.8ghz and i am trying to connect a 2.4ghz to the existing network (note: both devices a of different manufacturers) But when i try to search for my existing network with the 2.4ghz AP, i can't find the network. Please any one with a solution would be appreciated
↧
Wildlife cctv set up
I am setting up a cctv system to monitor wildlife. The area is 200 m from my property and I have laid electricity and a conduit for cables to the site. I want to have 15 cameras around the area and run these back to a central control point which will then be fed to three properties each will have monitors. What is the best way to set this up and what equipment would be recommended
↧
How to update HikVision Firmware in just nine simple steps - updated 20th February 2019
Updated 20-2-19 - corrected the link to the portal as Hikvision changed their url (again). Otherwise all is good. We use this method every day. Now viewed over 38,000 times.
Here's how to upgrade your HikVision camera or NVR to the latest firmware version in just nine simple steps:
Step 1: Download the latest HikVision firmware to your PC.
Step 2: Extract the digicap.dav file (which...
How to update HikVision Firmware in just nine simple steps - updated 20th February 2019
Here's how to upgrade your HikVision camera or NVR to the latest firmware version in just nine simple steps:
Step 1: Download the latest HikVision firmware to your PC.
Step 2: Extract the digicap.dav file (which...
How to update HikVision Firmware in just nine simple steps - updated 20th February 2019
↧
Setup motion recording on DS-2CD2646G1-IZ(S) setup help? Different than other cams?
Hi,
First, I am a bit of a Hik newbie so maybe it is my lack of experience that is the real problem
.
I have the above camera and was pulling my hair out trying to get the motion recording to work. I am used to doing the following:
On this newer EasyIP 4.0 DS-2CD2646G1-IZ(S) camera those steps do not work. I had to do some extra...
Setup motion recording on DS-2CD2646G1-IZ(S) setup help? Different than other cams?
First, I am a bit of a Hik newbie so maybe it is my lack of experience that is the real problem

I have the above camera and was pulling my hair out trying to get the motion recording to work. I am used to doing the following:
- Event > Basic Event > Enable Motion Detection
- Storage > Schedule Settings > Enable, Set to motion, copy to all days.
On this newer EasyIP 4.0 DS-2CD2646G1-IZ(S) camera those steps do not work. I had to do some extra...
Setup motion recording on DS-2CD2646G1-IZ(S) setup help? Different than other cams?
↧
↧
Have I bought a turkey?
Hi all
I realise that my registration on this forum "after" I bought a system is perhaps the wrong way around, but here I am anyway.
I just bought this system:
IP CCTV Systems On Sale | Get Free Ireland & UK Delivery
I have a 5 year old CCTV system and I wanted to upgrade. We've had a few burglaries in the area recently and although I was able to pick up the scumbag's car passing my gate, the quality is not what I would like. The old...
Have I bought a turkey?
I realise that my registration on this forum "after" I bought a system is perhaps the wrong way around, but here I am anyway.
I just bought this system:
IP CCTV Systems On Sale | Get Free Ireland & UK Delivery
I have a 5 year old CCTV system and I wanted to upgrade. We've had a few burglaries in the area recently and although I was able to pick up the scumbag's car passing my gate, the quality is not what I would like. The old...
Have I bought a turkey?
↧
Hik-Connect, trying to understand the security aspect (or lack there of).... and use of it VS IVMS 4500
Hi, I have been looking into Hik-Connect and other remote access options.
Hik-Connect has been billed as a "more secure" method to access devices. Perhaps I am getting the "more secure" impression from Hik's marketing. Either way, I am wondering if this is simply not true, or I don't understand how it works. It appears the port 80 (http) and 8000 (server) still need to be forwarded and open to the outside world. You can turn on UPnP or set it manually. As a general rule I do not run...
Hik-Connect, trying to understand the security aspect (or lack there of).... and use of it VS IVMS 4500
Hik-Connect has been billed as a "more secure" method to access devices. Perhaps I am getting the "more secure" impression from Hik's marketing. Either way, I am wondering if this is simply not true, or I don't understand how it works. It appears the port 80 (http) and 8000 (server) still need to be forwarded and open to the outside world. You can turn on UPnP or set it manually. As a general rule I do not run...
Hik-Connect, trying to understand the security aspect (or lack there of).... and use of it VS IVMS 4500
↧
Camera one just says no video
Camera one just says no video & it has a blank screen
↧
Pre-Record + Post-Record Settings Not Working
↧
↧
Slow down and speed up of frame rate
Any idea why the video is slowing down and speeding up when watching the replay of recorded video?
Seems to be surging and slowing down with inconsistant frame rate?
Any ideas?
Seems to be surging and slowing down with inconsistant frame rate?
Any ideas?
↧
Remote Playback of recordings on iVMS4200 Storage Server
Hi!
I have been going round in circles and hope someone can highlight where I might have made a misconfiguration.
I have iVMS4200 2.5.1.7 running on a server, which installed v1.2.1 of the Storage server component. Cameras are recording to the storage server and I can playback the recordings.
Outside of the network, I can connect to the external IP of the Storage server on an iphone, using iVMS4500. Remote playback of the recordings works fine.
I cannot get any PC running iVMS4200 to...
Remote Playback of recordings on iVMS4200 Storage Server
I have been going round in circles and hope someone can highlight where I might have made a misconfiguration.
I have iVMS4200 2.5.1.7 running on a server, which installed v1.2.1 of the Storage server component. Cameras are recording to the storage server and I can playback the recordings.
Outside of the network, I can connect to the external IP of the Storage server on an iphone, using iVMS4500. Remote playback of the recordings works fine.
I cannot get any PC running iVMS4200 to...
Remote Playback of recordings on iVMS4200 Storage Server
↧
Hikvision noisy NVR
Hello I have DS-7608NI-K2/8p this is very noisy. Is there a quieter NVR I can buy ( separately am trying to fit quieter fans ) or is there a newer one that lower noise output ?
Many thanks
Many thanks
↧