I have Hikvision DS-KD8003-IME1 with keypad DS-KD-KP. I have configured the system using iVMS-4200 but there is one thing which I haven't been able to solve. The keypad tone is somewhat annoying and I would like to disable it i.e. I would like to make the keypad silent. Any ideas how to do this?
↧
How to make Hikvision keypad silent?
↧
Thumbnail Images on Playback Timeline NO RESOURCE
Hello
I have a DS7608/K2 8P running latest version 3 firmware connected to 4 x 2343GOs and 1 x 2365G1 camera running latest firmware also. Resolutions and frame rates set to max on all with bit rates enabled for highest settings. All works great, playback, live view, etc. except in playback on all cameras there are no thumbnail images showing on the timeline. Instead the thumbnails show "no resource".
I have tried to work out if its my settings but have not come across anything...
Thumbnail Images on Playback Timeline NO RESOURCE
I have a DS7608/K2 8P running latest version 3 firmware connected to 4 x 2343GOs and 1 x 2365G1 camera running latest firmware also. Resolutions and frame rates set to max on all with bit rates enabled for highest settings. All works great, playback, live view, etc. except in playback on all cameras there are no thumbnail images showing on the timeline. Instead the thumbnails show "no resource".
I have tried to work out if its my settings but have not come across anything...
Thumbnail Images on Playback Timeline NO RESOURCE
↧
↧
Wrong user name or password!
Hi,
I hope someone give me a clue on how to rectify the above? Just recently every time I try and log into my 6003 Wifi door bell I get the above message. I know the password is correct as I can log in via the SADP tool but I cant using the bell's IP address! I am using "admin" as user name.
I hope someone give me a clue on how to rectify the above? Just recently every time I try and log into my 6003 Wifi door bell I get the above message. I know the password is correct as I can log in via the SADP tool but I cant using the bell's IP address! I am using "admin" as user name.
↧
Replaced broken camera now can't get good picture
Hi,
I have a Hikvision installed at home.
It's a DS-7204HGHI-F1 with three DS-2CE16C2T-VFIR3 cameras.
One of the cameras went bad and so the installer replaced it with a new one.
The new camera is a DS-2CE16D0T-VFIR3F.
Now I have 2 cameras with great image and the new one is a really bad image (the new camera).
I've called them several times and the final result is always the same. I personally think they don't know what they are doing. Also, they don't give me the admin password (they say...
Replaced broken camera now can't get good picture
I have a Hikvision installed at home.
It's a DS-7204HGHI-F1 with three DS-2CE16C2T-VFIR3 cameras.
One of the cameras went bad and so the installer replaced it with a new one.
The new camera is a DS-2CE16D0T-VFIR3F.
Now I have 2 cameras with great image and the new one is a really bad image (the new camera).
I've called them several times and the final result is always the same. I personally think they don't know what they are doing. Also, they don't give me the admin password (they say...
Replaced broken camera now can't get good picture
↧
I Series NVR Update
Hello all
Just seen on the Hikvision portal that there is a new firmware update for the I series NVR that's been released today.
V4.22.005 Build 191208
![www.hikvisioneurope.com]()
www.hikvisioneurope.com
Just seen on the Hikvision portal that there is a new firmware update for the I series NVR that's been released today.
V4.22.005 Build 191208
HIKVISION UK PORTAL
↧
↧
Hikvision iVMS-4200 - can I hide the event markers?
Hide smart event area markers (in blue) is there any way so you don't see them??
Thanks
Thanks
↧
Hik-Connect: Playback speed
Hi everyone,
In the last month, I took the plunge and bought a HikVision NVR (DS-7604NI-K1/4P) for home with four G1 Series IP camera's (2x 2355, a 2155 and a 2363). Cabled it all myself and I'm really happy with the results, worth every penny.
Thanks to this forum (megathread mainly), I have managed to get the VCA settings working (line crossing and intrusion detection) working with email alerts and also the IP camera firmware updated to the latest version.
I have also enabled the...
Hik-Connect: Playback speed
In the last month, I took the plunge and bought a HikVision NVR (DS-7604NI-K1/4P) for home with four G1 Series IP camera's (2x 2355, a 2155 and a 2363). Cabled it all myself and I'm really happy with the results, worth every penny.
Thanks to this forum (megathread mainly), I have managed to get the VCA settings working (line crossing and intrusion detection) working with email alerts and also the IP camera firmware updated to the latest version.
I have also enabled the...
Hik-Connect: Playback speed
↧
Hikvision Choices
Afternoon,
Apologies for the naivety - I'm new to CCTV and also new to the forum.
I'm looking for decent quality outdoor cameras for my house that will operate well in very low light as there is little lighting around my property. Initially I'll be installing approx. 4 camera but would like the option to expand in the future. I've been recommended the below:
Hikvision DS-2CD2385G1-I 8MP IR Fixed Turret Network Camera
Hikvision DS-7608NI-I2-8P 8 Channel Network Video Recorder
One...
Hikvision Choices
Apologies for the naivety - I'm new to CCTV and also new to the forum.
I'm looking for decent quality outdoor cameras for my house that will operate well in very low light as there is little lighting around my property. Initially I'll be installing approx. 4 camera but would like the option to expand in the future. I've been recommended the below:
Hikvision DS-2CD2385G1-I 8MP IR Fixed Turret Network Camera
Hikvision DS-7608NI-I2-8P 8 Channel Network Video Recorder
One...
Hikvision Choices
↧
How do I access my Hikvision 7608NI-E2 NVR from my mobile phone without port forwarding?
↧
↧
Hikvision Hik-Connect IOS App user manual V3.10.0
Please find the latest Hik-Connect user manual attached for IOS, iPhone, iPad users
↧
Hikvision door bell - wrong user name or password!
Hi,
I hope someone give me a clue on how to rectify the above? Just recently every time I try and log into my 6003 Wifi door bell I get the above message. I know the password is correct as I can log in via the SADP tool but I cant using the bell's IP address! I am using "admin" as user name.
I hope someone give me a clue on how to rectify the above? Just recently every time I try and log into my 6003 Wifi door bell I get the above message. I know the password is correct as I can log in via the SADP tool but I cant using the bell's IP address! I am using "admin" as user name.
↧
ivms 4200 vs install, no live view on android, recordings ok
have been using 4200 pcnvr for ages but wanted to update to somthing newer
have installed on my W10 server the lastest version of storage recorder and streamer
client installed on main pc and works fine for live view and config etc
but i cannot get the Android app to live view, was fine before on pcnvr software
can access recordings ok
any ideas?
have installed on my W10 server the lastest version of storage recorder and streamer
client installed on main pc and works fine for live view and config etc
but i cannot get the Android app to live view, was fine before on pcnvr software
can access recordings ok
any ideas?
↧
Hikvision DS-7608NI-K2 / 8P Intrusion detection alerts have stopped
Ok at a bit of a loss here, this has been working perfect for a while, now it isn't.
Basic checks
1) Email account? Sent test email to all 3 users in group. Works ok.
2) Check intrusion detection
Area Settings
Area 1 is Yellow
Settings
1
58
5
Arming Schedule all Blue
Linkage method
Send Email
Trigger Channel D1
I have also checked in Event logs nothing showing here when i jump around like a loonie in the zone of camera D1, any ideas here? Im loathed to...
Hikvision DS-7608NI-K2 / 8P Intrusion detection alerts have stopped
Basic checks
1) Email account? Sent test email to all 3 users in group. Works ok.
2) Check intrusion detection
Area Settings
Area 1 is Yellow
Settings
1
58
5
Arming Schedule all Blue
Linkage method
Send Email
Trigger Channel D1
I have also checked in Event logs nothing showing here when i jump around like a loonie in the zone of camera D1, any ideas here? Im loathed to...
Hikvision DS-7608NI-K2 / 8P Intrusion detection alerts have stopped
↧
↧
HikVision NVR Crashing
I have a new HikVision 6 Cam system that works well for about 8 hours, then the NVR crashes loosing all video streams.
A hard reboot (unplug/replug) usually brings everything back on line. The Kit is Model EK1-Q82T46 and the NVR is ERI-Q108-P8, purchased in September in USA. The NVR Firmware is V3.4.96Build180324 and when I try an on-screen update, it tells me that there is no Firmware update available.
The system looses video to a direct attached TV, to the iVMS-4200 software and...
HikVision NVR Crashing
A hard reboot (unplug/replug) usually brings everything back on line. The Kit is Model EK1-Q82T46 and the NVR is ERI-Q108-P8, purchased in September in USA. The NVR Firmware is V3.4.96Build180324 and when I try an on-screen update, it tells me that there is no Firmware update available.
The system looses video to a direct attached TV, to the iVMS-4200 software and...
HikVision NVR Crashing
↧
How Much Bandwidth and Storage does Hikvision's H.265+ Save?
Savings from Hikvision's H.265+ Encoding Technology
Everyday we urge our enquirers to buy from the Hikvision G1 Family rather than the old R6 family for a number of reasons: The price difference between the two families are minimal and the older series stop receiving...
How Much Bandwidth and Storage does Hikvision's H.265+ Save?
↧
I cannot access my Hikvision system when I am away from home?
Hello I have a hikvistion cctv systems I dont no alot about them or the set up
I am having a problem with viewing my camera while I am away from the wifi zone so through 4g it will not let me view live view or play back I getting a connection error and when I try do on connect I getting video playback failed error code 380356 but on the app it say connection fails I using ivms -4500 that where its say con fail I hik connect say the play back code above
I...
I cannot access my Hikvision system when I am away from home?
I am having a problem with viewing my camera while I am away from the wifi zone so through 4g it will not let me view live view or play back I getting a connection error and when I try do on connect I getting video playback failed error code 380356 but on the app it say connection fails I using ivms -4500 that where its say con fail I hik connect say the play back code above
I...
I cannot access my Hikvision system when I am away from home?
↧
What do you use to keep wires and connectors waterproof?
I wish there was a way to remove the power cable from my hikvision cameras as I am going to only use POE.
What would you reccommend to protect the cables as the ethernet cable will need connecting to the camera at the connection point and there will be the spare power supply cable too that need protecting?
Thanks for your help.
What would you reccommend to protect the cables as the ethernet cable will need connecting to the camera at the connection point and there will be the spare power supply cable too that need protecting?
Thanks for your help.
↧
↧
ieGeek 1080p bullet CCTV Help required
Hi 1st post here so go easy please
![]()
I've recently bought the iegeek 1080p bullet CCTV camera.
Set up seemed to go ok, I've installed the app on my android phone called "camhi" version 5.1.53
Whilst at home my phone connects to the camera via the app, but when out of wifi radius I can't connect to the camera.
Am I missing anything obvious ?
I have left the camera hardwired to ethernet cable, thinking this will give a...
ieGeek 1080p bullet CCTV Help required
I've recently bought the iegeek 1080p bullet CCTV camera.
Set up seemed to go ok, I've installed the app on my android phone called "camhi" version 5.1.53
Whilst at home my phone connects to the camera via the app, but when out of wifi radius I can't connect to the camera.
Am I missing anything obvious ?
I have left the camera hardwired to ethernet cable, thinking this will give a...
ieGeek 1080p bullet CCTV Help required
↧
Intercom problem
Prosím, dej mi radu. Mám interkom Hikvision DS-KH8300 s DS-KV8202. Stává se mi, že po vyzváněcím tónu je černá obrazovka fotoaparátu venkovní. Druhým vyzváněcím tónem je vše v pořádku. Víte, kde to něco způsobuje?
Kromě toho někdy, když stisknete tlačítko venkovní jednotky, nehraje venkovní jednotku vyzváněcího tónu.
Posledním problémem je, že někdy, když stisknu odpovědi na LCD, zvuk a obraz zamrznou a chvíli trvá, než mohu načíst video z venkovní jednotky.
Děkuji ti za tvou radu.
Kromě toho někdy, když stisknete tlačítko venkovní jednotky, nehraje venkovní jednotku vyzváněcího tónu.
Posledním problémem je, že někdy, když stisknu odpovědi na LCD, zvuk a obraz zamrznou a chvíli trvá, než mohu načíst video z venkovní jednotky.
Děkuji ti za tvou radu.
↧
NVR4.0 AccessController IoT linkage - Arming failed?
Hi everyone,
I'm trying to link an NVR (DS-7732NI-K4 on V4) with a DS-K2602 Access Controller via IoT.
The feature of overlaying Card numbers and access events on the video footage will be extremely handy for us. But i'm hitting a wall and have been banging my head for 4 hours now.
DS-7732NI-K4 Just upgraded to V4.21.5 build 190509
DS-K2602 Access Controller on V2.05 build 190301
Chrome does NOT show the IOT Channel Settings for some reason? It's only visible in Internet Explorer.
In...
NVR4.0 <-> AccessController IoT linkage - Arming failed?
I'm trying to link an NVR (DS-7732NI-K4 on V4) with a DS-K2602 Access Controller via IoT.
The feature of overlaying Card numbers and access events on the video footage will be extremely handy for us. But i'm hitting a wall and have been banging my head for 4 hours now.
DS-7732NI-K4 Just upgraded to V4.21.5 build 190509
DS-K2602 Access Controller on V2.05 build 190301
Chrome does NOT show the IOT Channel Settings for some reason? It's only visible in Internet Explorer.
In...
NVR4.0 <-> AccessController IoT linkage - Arming failed?
↧