I am not able to find firmware upgradre for V380 ip camera. Please help
↧
V380 firmware upgrade
↧
DS-2CD4A26FWD-IZS/P - hik connect i grey out
Hello guy can you pls help me enable hik connect on DS-2CD4A26FWD-IZS/P
firmware version: V5.4.5 build 171115
on SDAP tool hik-connect is grey out
Thank you
firmware version: V5.4.5 build 171115
on SDAP tool hik-connect is grey out
Thank you
↧
↧
How to update HikVision Firmware in just nine simple steps - updated 20th February 2019
Updated 20-2-19 - corrected the link to the portal as Hikvision changed their url (again). Otherwise all is good. We use this method every day. Now viewed over 38,000 times.
Here's how to upgrade your HikVision camera or NVR to the latest firmware version in just nine simple steps:
Step 1: Download the latest HikVision firmware to your PC.
Step 2: Extract the digicap.dav file (which...
How to update HikVision Firmware in just nine simple steps - updated 20th February 2019
Here's how to upgrade your HikVision camera or NVR to the latest firmware version in just nine simple steps:
Step 1: Download the latest HikVision firmware to your PC.
Step 2: Extract the digicap.dav file (which...
How to update HikVision Firmware in just nine simple steps - updated 20th February 2019
↧
Upgraded firmware but old GUI
Hello all.
I have just upgraded my DS-7608NI-I2 / 8P to the latest V4.22.005 build 191208 firmware, However i was expecting the new GUI but it's the old one still.
Should it be upgraded to the new one or is this NVR stuck on the V3 GUI?
The upgrade looks like it has taken as there are a few different menus etc, but i still have to use IE to view live cameras so i'm not sure it's completely taken or not.
It says web version is V4.0.1 build 191120
Regards
Mat
I have just upgraded my DS-7608NI-I2 / 8P to the latest V4.22.005 build 191208 firmware, However i was expecting the new GUI but it's the old one still.
Should it be upgraded to the new one or is this NVR stuck on the V3 GUI?
The upgrade looks like it has taken as there are a few different menus etc, but i still have to use IE to view live cameras so i'm not sure it's completely taken or not.
It says web version is V4.0.1 build 191120
Regards
Mat
↧
HikVision TP/MSD Card Errors
Hi, I was wondering if someone could help.
I have purchased a Scandisk 64GB micro SD card (following a purchase of a Scandisk 128GB micro SD card) and when inserted into HikVision monitor "Formating Failed" message shown and screen shows TF Card Exception.
Model is DS-KH8340-TCE2
Any way of resolving this?
I have purchased a Scandisk 64GB micro SD card (following a purchase of a Scandisk 128GB micro SD card) and when inserted into HikVision monitor "Formating Failed" message shown and screen shows TF Card Exception.
Model is DS-KH8340-TCE2
Any way of resolving this?
↧
↧
Help with exporting a file
Hello folks,
I am trying to get a file of an event onto a USB stick and seem to be failing dismally.
I have gone into the export menu and have identified the file that I want. To be on the safe side I have 'locked' it, I'm not sure if that is of any help though.
Having identified the file which is 11.33MB in size, I then click on 'Export' but when the page changes nothing is showing to export. the file size is shown in the bottom corner of the screen.
Does anyone have any thoughts on...
Help with exporting a file
I am trying to get a file of an event onto a USB stick and seem to be failing dismally.
I have gone into the export menu and have identified the file that I want. To be on the safe side I have 'locked' it, I'm not sure if that is of any help though.
Having identified the file which is 11.33MB in size, I then click on 'Export' but when the page changes nothing is showing to export. the file size is shown in the bottom corner of the screen.
Does anyone have any thoughts on...
Help with exporting a file
↧
Help with new system
Hi everyone, I'm new to all this but I am looking to purchase my first cctv system for my home an would like some help if possible please. I'll attach some pics to try and show what I want to cover. I was thinking 3-4 4mm(not sure this is right choice) hikvision Turret cameras (ds-2cd238561-i 8MP). I need to cover the cars down the side of the house and the gate, the front of the house, the back garden/patio doors. I need to cover the back of the garden as the railway track is right behind...
Help with new system
Help with new system
↧
Connection to Devices Failing - PlusNet/Tenda set up
Hi all
Apologies if I do not provide all the info needed to assist with this problem, I am not very techy...please ask and I will do my best to find out more info if needed.
We are running Hikvision CCTV and recently switched broadband providers - we have also set up a WIFI mesh system in the house to improve the WIFI signal.
Upon advice from the technician who set up our CCTV, I have added port forwarding on the Plusnet router and updated the IP address in the device settings on the IVMS...
Connection to Devices Failing - PlusNet/Tenda set up
Apologies if I do not provide all the info needed to assist with this problem, I am not very techy...please ask and I will do my best to find out more info if needed.
We are running Hikvision CCTV and recently switched broadband providers - we have also set up a WIFI mesh system in the house to improve the WIFI signal.
Upon advice from the technician who set up our CCTV, I have added port forwarding on the Plusnet router and updated the IP address in the device settings on the IVMS...
Connection to Devices Failing - PlusNet/Tenda set up
↧
deactivte account on ezviz
Hi,
how to deactivate my account to ezviz? i will sell my 4channel DVR and buy a 8 channel nd my friend wnt new account for the ezviz to view the dvr i sold to him. please help me please. tnx
how to deactivate my account to ezviz? i will sell my 4channel DVR and buy a 8 channel nd my friend wnt new account for the ezviz to view the dvr i sold to him. please help me please. tnx
↧
↧
I want to remove the camera from my old account Ezviz mini 537547656
↧
I want to remove the camera from my old account Ezviz mini 537547656
↧
HikVision NVR Crashing
I have a new HikVision 6 Cam system that works well for about 8 hours, then the NVR crashes loosing all video streams.
A hard reboot (unplug/replug) usually brings everything back on line. The Kit is Model EK1-Q82T46 and the NVR is ERI-Q108-P8, purchased in September in USA. The NVR Firmware is V3.4.96Build180324 and when I try an on-screen update, it tells me that there is no Firmware update available.
The system looses video to a direct attached TV, to the iVMS-4200 software and...
HikVision NVR Crashing
A hard reboot (unplug/replug) usually brings everything back on line. The Kit is Model EK1-Q82T46 and the NVR is ERI-Q108-P8, purchased in September in USA. The NVR Firmware is V3.4.96Build180324 and when I try an on-screen update, it tells me that there is no Firmware update available.
The system looses video to a direct attached TV, to the iVMS-4200 software and...
HikVision NVR Crashing
↧
How to use Tower conduit to HIK junction box
Hi all
What size tower conduit do I need or what connector do I need to join it to a HIK junction box please?
Do most of you use conduit to hide external cables on residential and commercial installs or only at low levels and not too worried about the higher level cameras?
I'm trying to work out what is expected for an average install and taking into account cost, time and ease/speed... but with also being professional?
I know some installers who use no conduit on residential.... even at...
How to use Tower conduit to HIK junction box
What size tower conduit do I need or what connector do I need to join it to a HIK junction box please?
Do most of you use conduit to hide external cables on residential and commercial installs or only at low levels and not too worried about the higher level cameras?
I'm trying to work out what is expected for an average install and taking into account cost, time and ease/speed... but with also being professional?
I know some installers who use no conduit on residential.... even at...
How to use Tower conduit to HIK junction box
↧
↧
Unable to upgrade firmware
Hi there,
I am trying to upgrade the firmware on my ds-2cd2532f-i cameras through my K4 NVR and keep getting an error message saying "D1 - Upgrade Failed" on all the cameras.
I am using the latest V4 firmware on my K4 and the cameras are working fine.
I have another K4 and the firmware updates are working fine.
I have also used the batch update program and gives me an unknown error message.
Any ideas?
Cheers,
Epipen
I am trying to upgrade the firmware on my ds-2cd2532f-i cameras through my K4 NVR and keep getting an error message saying "D1 - Upgrade Failed" on all the cameras.
I am using the latest V4 firmware on my K4 and the cameras are working fine.
I have another K4 and the firmware updates are working fine.
I have also used the batch update program and gives me an unknown error message.
Any ideas?
Cheers,
Epipen
↧
Changed Routers and CCTV dropped
Hello,
I'm hoping someone can help. I had 3 Hikvision cameras and an NVR installed in October 2018. Everything has been working great until we upgraded the routers yesterday to a Whole Home Mesh Wifi System yesterday. I have managed to get the NVR online and can see the 2 camera connected directly to it but not the front door camera.
The original setup was; 2 cameras front and back of house into the NVR in the loft. The NVR was then connected to a Wifi Powerline hotspot. The last camera...
Changed Routers and CCTV dropped
I'm hoping someone can help. I had 3 Hikvision cameras and an NVR installed in October 2018. Everything has been working great until we upgraded the routers yesterday to a Whole Home Mesh Wifi System yesterday. I have managed to get the NVR online and can see the 2 camera connected directly to it but not the front door camera.
The original setup was; 2 cameras front and back of house into the NVR in the loft. The NVR was then connected to a Wifi Powerline hotspot. The last camera...
Changed Routers and CCTV dropped
↧
DS-7716NI-I4 problem since upgrade to NVR.4.... i think or maybe the change of ISP
Hi
I'm having issues with my DS-7716NI-I4.
My Platform Access/Register Status is showing as Offline and I cant get it to change to Online no matter what I try.
I have spent five hours today going over the settings, I'm missing something silly I think.
to make things worse I'm not sure if it has been a problem since the NVR upgraded to NVR.4 or when I changed ISP to SKY from BT.
Any help appreciated
I'm having issues with my DS-7716NI-I4.
My Platform Access/Register Status is showing as Offline and I cant get it to change to Online no matter what I try.
I have spent five hours today going over the settings, I'm missing something silly I think.
to make things worse I'm not sure if it has been a problem since the NVR upgraded to NVR.4 or when I changed ISP to SKY from BT.
Any help appreciated
↧
HIKVISION DS-2CD202WF-I(W) RTSP STREAM LAGS
I have a HIKVISION DS-2CD202WF-I(W) camera. The stream through the HIKVISION webpage - accessed using the camera IP address - in Internet Explorer and the ONVIF Device Manager(ODM) in Windows 10 works fine without any lags.
But, when I try to stream using VLC, ffplay(ffmpeg), OpenCV C++ VideoCapture class in Ubuntu 16.04 & 18.04, there is a lag of approximately 2 seconds.
The URLs I have tried are...
HIKVISION DS-2CD202WF-I(W) RTSP STREAM LAGS
But, when I try to stream using VLC, ffplay(ffmpeg), OpenCV C++ VideoCapture class in Ubuntu 16.04 & 18.04, there is a lag of approximately 2 seconds.
The URLs I have tried are...
HIKVISION DS-2CD202WF-I(W) RTSP STREAM LAGS
↧
↧
Fleureon cloud storage?
Hi guys. I have a generic fleureon wireless cctv system without a hard drive. There is only 1 camera on the network. I intend to get an external hard drive but ideally I am looking for a service that I can stream my camera to 24/7 to record and store on a cloud so I can playback etc. Is there a service that supports my system?
↧
NVR offline & wrong user name and password
Hello, I am hopeless with my NVR DS-7616NI-K2/16P and I hope someone here can advise me
In SADP tool I can set up the NVR IP address and change password, what I successfully did several times, however, when I want to login with admin and password using Microsoft Explorer and Mozilla, it says wrong user name and password.
When I try to use ivms-4200 3.2.0.10, or also older version, NVR is visible in Online devices, but when I add it into devices, it shows Offline message...
NVR offline & wrong user name and password
In SADP tool I can set up the NVR IP address and change password, what I successfully did several times, however, when I want to login with admin and password using Microsoft Explorer and Mozilla, it says wrong user name and password.
When I try to use ivms-4200 3.2.0.10, or also older version, NVR is visible in Online devices, but when I add it into devices, it shows Offline message...
NVR offline & wrong user name and password
↧
Hikvision EU portal vs UK portal
Hey there,
Anyone know the difference between the EU hikvision portal vs the UK portal for firmware updates?
Thanks
Anyone know the difference between the EU hikvision portal vs the UK portal for firmware updates?
Thanks
↧