Quantcast
Channel: IP CCTV Forum for IP Video, network cameras & CCTV software
Viewing all 8450 articles
Browse latest View live
↧

Hikvision Turret Cameras With Built-In Microphones

January 21, 2020, 7:01 am
$
0
0
Turret cameras with built-in microphones are finally here. This is what we know about the anticipated range of -IU, Hikvision Turret Cameras featuring built-in microphones.


Why is a built in microphone useful?

Including the ability to record sound as well as video is a great way of adding an extra depth of security to your CCTV system.

Video evidence is of course useful for many aspects of security, whether that be monitoring the live footage of an area, watching out for...

Hikvision Turret Cameras With Built-In Microphones
↧
Search

separate cameras from network Nvr 7608ni i2 8

January 21, 2020, 7:54 am
$
0
0
hi, i have a nik hikvision 7608 ni i2 8, without poe with an ethernet port only.
is it possible to separate the ip cameras from the internet since it only has one lan port for everything? thank you
↧
↧

Video intercom 2nd gen -how to control second door ?

January 21, 2020, 11:58 am
$
0
0
hi everyone, do you know how can I control the second relay on main door station (DS-KD8003-IME1) ? From iVMS4200 I can set 3 passwords but all these passwords controls the first relay on main door station.
Also I do not see in the iVMS4200 any option to associate a PIN/password for first relay (door) and a different one for second relay (door)
I would like to know how can I control it over the SIP protocol.
My setup involves no indoor station(s) only the main door and asterisk and...

Video intercom 2nd gen -how to control second door ?
↧

Network unstable problem

January 21, 2020, 4:12 pm
$
0
0
Hi,

I have 4 cameras connect via ip, using the hik vision app on my iPhone iOS 13.1.3

Sometimes I can only get one cam working, other times none.
They keep saying ‘network is unstable connecting again’

It says my device is offline

any ideas how to fix this?
There always seems to be a problem with these cams, had them for about a year and it’s rare all 4 work.
↧

DS-KD8003-IME SIP protocol

January 22, 2020, 4:16 am
$
0
0
Hello

I bought the DS-KD8003-IME door bell.
I was able to get it up and running (and updated) and changed the netword protocol to SIP because I don't want to have a hikvision indoor station with its limited functionality.
I then made a SIP server with FreePBX, witch only the ulaw and x264 codecs enabled. Afterwords I set up some softphones with only those codecs enabled.
I changed the IME1 settings to call the correct extension and connect to the sip server.

When I push the button of the...

DS-KD8003-IME SIP protocol
↧
↧

Smart Supplement Light

January 22, 2020, 5:57 am
$
0
0
Smart Supplement Light - what does this setting do in the IP camera settings?
↧

Can you run HikConnect on AppleTV?

January 22, 2020, 6:23 am
$
0
0
I cant seem to find the HikConnect app on the AppleTV app store and wondered if there was a way of adding it?

Anyone been able to do this?

Thanks.
↧

Standalone PTZ

January 22, 2020, 12:44 pm
$
0
0
Hi.

I want to use a Hikvision IP PTZ camera as a standalone device with not NVR. I can connect this to the local LAN and access the built in web view, which is all that will be needed. I would like to add PTZ joystick control, and while I could run a serial cable to the camera location, I wondered if there was a network version that can control the PTZ of the camera without an NVR?

The site already has CCTV and an NVR, this is just a completely standalone live view only.

Thanks.
↧
Search

URL for generic ipc365 IP camera to be used with ispy

January 23, 2020, 2:21 am
$
0
0
Hi there

I recently bought a number of generic IP cameras that I can currently access through an android app and their own proprietary app but I would like to be able to use them with ispy too. I have had no luck getting access to them or URLs to use with ispy even using its scanners and wizards.

The camera were branded as klzhe and show up as ipc365 when looking for devices on my router. I have tried a number of username and password combos suggested on ispys website and other forum pages...

URL for generic ipc365 IP camera to be used with ispy
↧
↧

AHD DVR

January 23, 2020, 4:33 am
$
0
0
Hi.

Im looking to replace an old Qvis DVR with a Hikvision.

The existing cameras are a mix of 2.4MP and 4MP AHD cameras.

Looking at the specs on the Hikvision, for AHD they show 4MP, 1080p/25 etc, but not 2.4MP.

Would the old Qvis 2.4MP work with a new Hikvision?

Cheers.
↧

Firmware Upgrade for DS-2CD2742FWD-I + DS-7608NI-E2/8P/A

January 23, 2020, 4:46 am
$
0
0
I was wonder if any one knows the URL for the firmware upgrade for these cameras + NVR DS-2CD2742FWD-I and NVR DS-7608NI-E2/8P/A . For the past few days one of my cameras is being turned off and needs unpluging from the NVR and resetting the NVR before it will restart . I have had this in the past and all was well once the firmware had been updated which was about 1 year ago . If I unplug the internet from the NVR it runs fine but as soon as it been on a few hours the same camera is turned...

Firmware Upgrade for DS-2CD2742FWD-I + DS-7608NI-E2/8P/A
↧

Howto setup volume with DS-KH6320-WTE1/2 + DS-KD8003-IME1/2

January 23, 2020, 6:23 am
$
0
0
Hi,

how could I setup the many different necessary volume levels?

I think the firmware have to difference between:
- speaker volume outside
- microphone sensitivity outside
- calling sound outside (or disable? how?)

- speaker volume display
- microphone sensitivity display
- doorbell sound

But in the iVMS4200 software I can only find two volumes...

Best wishes!
↧

IPTV setup for shed

January 23, 2020, 9:18 am
$
0
0
Hello,

I'm intending to add some cameras to a shed which will be used for monitoring livestock. As part of this I would like to cover two yards with cameras for security purposes.
I believe that 4 cameras will suffice inside the shed and two exterior cameras for security.

There is currently an old analog system wired from the shed into the house supporting two old cameras - this system is approx 15yrs old.
I was hoping to use the cabling as a wired connection between the house and shed...

IPTV setup for shed
↧
↧

Hik-connect playback jumping

January 23, 2020, 3:56 pm
$
0
0
Can someone give some advice as to how I fix an issue with my hik-connect playback? Any motion detection alerts get stored in the event tab. When playing back some can range from 30 seconds to two minutes. When watching the footage it appears that it records prior to and after the motion detection but at the point of motion detection on the playback it freezes sometimes for a period of up to 20 seconds and jumps the frame. I’ve not been able to get back to the exact point the video is lost...

Hik-connect playback jumping
↧

Hikvision Officially Release V4 Firmware for their K-Series NVRs - V4.21.005

January 24, 2020, 9:13 am
↧
Search

Setting up ANPR Camera

January 24, 2020, 11:36 am
$
0
0
Hey folks,

I've got a DeepinView camera, and wanted to know if this - How to set up Hikvision ANPR, is the most up to date setup instructions or if there is anything else?

I notice it says setup through NVR, are there any for setting up through a 4G router only?

Thanks
↧

Live View Failed - Hikvision 7-Series ANPR IP Camera

January 24, 2020, 11:45 am
$
0
0
Hey,

I installed an DS-2CD7A26G0/P-IZS(8-32mm) 2MP DeepInView Darkfighter Varifocal ANPR Bullet today (first install of this system).

It is connected to a 4G router, powered through a PoE. When plugged directly into the router I could connect and the live feed was fine. It turns out that 30-40 minutes after installing the camera and setting it up it stopped sending vehicle reads.

The back office it is integrated with hasn't been able to connect to it again, and it is showing an "Live...

Live View Failed - Hikvision 7-Series ANPR IP Camera
↧
↧

Fleureon cloud storage?

January 24, 2020, 1:49 pm
$
0
0
Hi guys. I have a generic fleureon wireless cctv system without a hard drive. There is only 1 camera on the network. I intend to get an external hard drive but ideally I am looking for a service that I can stream my camera to 24/7 to record and store on a cloud so I can playback etc. Is there a service that supports my system?
↧

Can you mount junction boxes with cable going up instead of down?

January 24, 2020, 2:03 pm
$
0
0
So I’ve got my junction boxes to mount my bullet cameras.
The wires come down from the roof so can I have the wire entry at the top facing up?
On the box itself it says up is the other way with cables going downwards?

Would having the entry hole of the junction box upwards be a problem or does the wire have to go in from below?
I’d just turn it upside down? Or is it to do with water getting in?

Thanks.
↧

DS-7716NI-I4 problem since upgrade to NVR.4.... i think or maybe the change of ISP

January 24, 2020, 5:28 pm
$
0
0
Hi

I'm having issues with my DS-7716NI-I4.

My Platform Access/Register Status is showing as Offline and I cant get it to change to Online no matter what I try.
I have spent five hours today going over the settings, I'm missing something silly I think.

to make things worse I'm not sure if it has been a problem since the NVR upgraded to NVR.4 or when I changed ISP to SKY from BT.

Any help appreciated
↧
Viewing all 8450 articles
Browse latest View live
Search